To change the Agent, Vendor, and Shackle codes on the CodeBox lockbox, please follow these instructions:

Enter the 6-digit admin/agent code on the lockbox and press <ENTER>.

Wait for 5 seconds until the screen displays "Select CMD:" (select command) at the top.

To change the admin/agent code, press <4>. Enter your new agent code and press <ENTER>. On the phone number screen, press <ENTER> again to save the new code.

To change the vendor/door code, press <5>. Enter your new vendor code and press <ENTER> to save.

To change the shackle code, press <7>. Enter your new shackle code and press <ENTER> to save.

When you're finished, press <0> to exit.

If you have any doubts or concerns do not hesitate to email us at [email protected].